Product Icon

Real-Time Fraud Detection and Blocking for WooCommerce

Block fraud before billing, review it on your Orders list or both. Stops slow/fast carding bots. Enterprise Antifraud Protection since 2009.
Choose a billing option
$99
Save 20%
$198 $158.40

Subscription includes

  • Product updates and improvements
  • Customer support
  • 30-day money-back guarantee

  • ** New: **  you choose how to fight fraud — block before billing, review after billing from your Orders list, or both
  • **New:** velocity protection measured in hours — stops rapid-fire card testing bots and now the slow-rollers that pause between attempts and rotate IP addresses
  • Block fraud before payment — no order created, no payment captured, no chargeback
  • Powered by MaxMind’s minFraud network — real-time risk scoring across billions of transactions annually
  • Minimize query costs with smart query caching and bot blocking

Block fraud before it costs you

Most fraud detection tools flag orders after payment has already been processed — leaving you with chargebacks, gateway fees, reputational damage and wasted time reversing transactions. Real-Time Fraud Detection and Blocking for WooCommerce takes a different approach.

When a customer clicks Place Order, this extension intercepts the checkout and screens the transaction through MaxMind’s minFraud risk detection network before your payment gateway is ever contacted, new in version 8.3.3, what you do with that score is your choice.  Block high-risk orders instantly: no order is created, no payment is captured, and no chargeback is filed. Review the risk score and full MaxMind detail now recorded on every order after billing. Or combine both.

New in 8.3.3 — you choose how to fight fraud

Every order that goes through now shows its MaxMind risk score and screening result in two new columns on **WooCommerce > Orders**, and the full MaxMind response is written to the order notes in plain, readable form. Scan the Risk Score column straight down your Orders list, open any order to see why it scored the way it did, and run fraud control the way that fits your business:

  1. Block before billing.  Set a decline threshold and let the extension stop high-risk orders at checkout, before your gateway is ever contacted. Nothing is captured and there is nothing to reverse — hands-off protection that runs itself.
  2. Review after billing.  Prefer a human in the loop? Let orders through, read the risk score and MaxMind’s analysis on each order — how far the customer’s IP is from the billing address, whether it’s a proxy, VPN or hosting provider, how long the email address has existed — then ship, or cancel and refund the ones that don’t add up, before anything leaves your warehouse.
  3. Review after billing.  Prefer a human in the loop? Let orders through, read the risk score and MaxMind’s analysis on each order — how far the customer’s IP is from the billing address, whether it’s a proxy, VPN or hosting provider, how long the email address has existed — then ship, or cancel and refund the ones that don’t add up, before anything leaves your warehouse.

This works because of when screening happens. Orders are screened before payment, so a declined order is never charged. An accepted order is charged — but the money is only truly lost once the goods ship. Until then you can cancel and refund: you may pay a processing fee, but you keep the stock and avoid the chargeback and its fee.

One caveat for review-only stores: keep your decline threshold below 100%. IP velocity protection stops card testing bots by counting declines — at a 100% threshold nothing is ever declined, so bots run unchecked and every attempt costs you a MaxMind query. A threshold in the 90s still sends virtually all real orders through for review while giving velocity protection the declines it needs to shut bots down.

Reviewing orders? Choose Insights or Factors. A Score query returns the risk number and little else. Insights and Factors return the IP, email, address and device detail you’ll want in front of you when you decide.

New in 8.3.3 — velocity protection measured in hours, not just minutes

Most card testing bots still hammer a store in rapid bursts, and velocity protection shuts them down in minutes (see the case study below). But we’ve now met a newer breed: slow-rollers that pause a random 1 to 30 minutes between tests and roll across hundreds of IP addresses, so no single IP ever looks busy in a ten-minute window. We’ve extended the velocity system to catch them too.

Version 8.3.3 can now measure velocity in hours. Count declines per IP over a window of up to 24 hours, and block an offending IP for up to 72 hours. A bot that comes back to an IP twenty minutes — or six hours — later finds it already blocked, at no MaxMind query cost. Set Max attempts to 0 and an IP is blocked on its very first decline, so every address the bot burns is out of play for days and its pool shrinks with every attempt.

Blocked IPs are stopped before the MaxMind API is called, so no query credits are consumed. The shopping session is destroyed and the cart emptied, forcing the bot to start completely over. The block timer resets with each new attempt, so persistent bots stay locked out and give up.

Real-world results: card testing bot stopped cold

A merchant’s store was hit by a card testing bot — 105 checkout attempts in under 20 minutes using randomized names, junk email addresses, and rotating IP addresses. Here’s what happened with velocity protection enabled:

Fraud attempts:  105
Reached payment: 0
Blocked by velocity: 92
Total cost to stop: $0.07

Every order scored 99% risk and was declined instantly before reaching the payment gateway. After 5 declines, velocity protection blocked the IP. The remaining 92 attempts consumed zero MaxMind queries. Destroying the session and emptying the cart forced the bot to rebuild its cart from scratch on every attempt.

When the bot rotated to a second IP, velocity caught it again. The bot gave up after about 20 minutes. Total cost: 13 MaxMind queries at approximately 7 cents.

That bot worked fast, as most still do. With velocity windows now also measured in hours, the same protection reaches the slow-rollers too.

How it works

Every checkout is screened through a multi-layer process designed to
maximize protection while minimizing query costs:

  1. The customer clicks Place Order.
  2. Shopper present? Orders entered in the admin, scheduled renewals and orders from integrations have no shopper at the keyboard; they are handled according to your setting.
  3. Google Storebot check. A verified Google Storebot test checkout proceeds immediately — no MaxMind query, no velocity counting.
  4. Whitelist check. If the IP is whitelisted, the order proceeds immediately.
  5. Velocity check. If this IP is currently blocked from previous declined attempts, it is stopped instantly — no MaxMind query consumed.
  6. Cache check. If a recent identical checkout attempt was screened, the cached decision is reused — no MaxMind query consumed.
  7. MaxMind query. Order data is sent to the minFraud API for real-time risk analysis.
  8. Risk evaluation. The score is compared against your thresholds. High-risk orders are blocked; orders above your notification threshold trigger an email alert.
  9. Velocity tracking. If the order is declined, the IP’s decline counter is incremented
  10. Record the outcome. For orders that go through, the risk score and screening result appear in the Orders list and the MaxMind response is added to the order notes

All of this happens in less than a tenth of a second. Legitimate customers experience no delay.

Features

  • Pre-payment fraud screening across all checkout types and payment gateways — block checkout, classic checkout, WooPay and PayPal
  • Risk Score and Screening Result columns on WooCommerce > Orders, so you can scan placed orders by risk and decide what to ship
  • Full MaxMind response on the order — the risk score and MaxMind’s analysis of that transaction, in readable form, in the order notes (each can be turned off)
  • MaxMind minFraud integration supporting Score, Insights, and Factors service tiers
  • IP velocity protection — stops rapid-fire card testing bots, and windows up to 24 hours with blocks up to 72 hours catch the slow-rollers that rotate IPs and pause between attempts; sessions destroyed and carts emptied on block
  • Smart query caching — reuses results when customers retry with the same contact and address information; purged automatically when you change your whitelist or thresholds
  • Google Storebot auto-whitelist — Google Shopping and Merchant Center verification checkouts look exactly like automated bot checkouts; without this they use queries and can get Google velocity-blocked. Verified by Google’s published IP ranges, a cached verdict, or forward-confirmed reverse DNS — the user agent alone is never trusted. Off by default
  • Screening statistics — Today, Yesterday and All Time counts of screenings, MaxMind queries used, and queries saved by caching, whitelisting, Storebot and velocity protection
  • Admin, renewal and integration orders — choose whether to whitelist them, screen them without IP and device data, or screen them normally
  • Eight HTML email notification types: fraud alerts (accepted/declined), velocity blocks, whitelist bypass, processing errors (accepted/declined), Google Storebot activity started, and a Storebot daily summary
  • CDN and proxy IP detection — CloudFlare, Akamai, AWS, nginx and others, with a warning if your proxy setting looks wrong
  • IP whitelisting of IPv4 and IPv6 addresses with CIDR support. Whitelist your office IP if you ever process orders manually
  • Configurable risk thresholds with separate email and auto-decline thresholds, and a customizable decline message
  • Configurable error handling — choose whether to accept or decline when MaxMind is unreachable
  • Activity logging in WooCommerce’s built-in logs (WooCommerce > Status > Logs)
  • HPOS (High-Performance Order Storage) compatible

Smart query caching

When a customer retries checkout with identical billing, shipping, and contact data — for example, after adding or removing a product to check shipping costs or sales tax — the extension serves the cached screening result instead of making another MaxMind API call. This can significantly reduce your query costs on stores with high retry rates.

The cache is automatically purged whenever you change your whitelist or risk thresholds, so cached decisions always reflect your current settings.

Quick start guide

Getting up and running takes just a few minutes:

  1. Install the Real-Time Fraud Detection and Blocking for WooCommerce extension.
  2. Create a minFraud account at MaxMind. A free trial with 1,000 queries is currently available.
  3. Follow the links in your MaxMind account to generate a license key.
  4. Enter your MaxMind Account ID and license key at the top of the extension’s settings page (WooCommerce > Fraud Detection/Blocking).
  5. Click the “Test MaxMind Connection” button to verify your credentials are working.
  6. Check “Enable Fraud Screening” at the top of the settings page.
  7. Set your risk thresholds. Start with the email notification threshold at 0% so you receive an email on every screened order — you can raise this later once you’re comfortable. Set the decline threshold to 100% initially so no orders are blocked. As you gain experience with how MaxMind scores your customer base, lower it — into the 90s if you’ll review orders yourself, or to 50%, then 40%, and eventually under 10% if you’d rather block automatically.
  8. Enable query caching to minimize your MaxMind query costs.
  9. Check the email notification addresses. The defaults are usually fine, but make sure the “To” address is a valid email where you can receive the extension’s merchant notification emails.
  10. Leave IP velocity protection disabled for now until you’re familiar with how the extension operates. When you turn it on, a decline threshold below 100% gives it the declines it needs.
  11. Click “Save Changes” at the bottom left to save your settings
Start in monitor-only mode (decline threshold at 100%) for your first week. Watch the Risk Score column and the fraud alert emails to learn how MaxMind scores your typical orders, then set your threshold for the approach you’ve chosen.

Account and pricing

This extension requires a MaxMind minFraud account. The account is not created during installation — you will need to sign up separately at the MaxMind signup page. A free trial with 1,000 queries is currently available. There is no minFraud subscription and no service tier to commit to. minFraud is pay-as-you-go: you are billed per query, and the service tier is chosen on the extension’s settings page and can be changed at any time. As of this writing MaxMind’s list pricing is approximately $0.005 per Score query, $0.015 per Insights query and $0.020 per Factors query. For details, see the MaxMind pricing page. MaxMind account setup and billing are handled directly through MaxMind.

Requirements

  • WooCommerce 7.0 or higher
  • WordPress 5.8 or higher
  • PHP 7.4 or higher
  • MaxMind minFraud account

Privacy

Real-Time Fraud Detection and Blocking for WooCommerce screens orders using MaxMind’s minFraud service. To perform this screening, checkout data is sent to MaxMind in real time: IP address, email domain, billing and shipping address and phone number, order amount, browser user agent and language, and a hashed shopping session ID. Email addresses are transmitted as MD5 hashes and session IDs as SHA-256 hashes, so neither reaches MaxMind in readable form. Customer names are not sent.

The risk score, screening result and MaxMind response for each order are saved with that order, where they remain for the life of the order record. Screening activity is recorded in WooCommerce’s logs to support fraud investigation and troubleshooting. The velocity protection, query cache and Storebot verification records are temporary and are cleared automatically. Screening statistics are daily counts only and contain no customer data.

No customer data is shared with any party other than MaxMind. If you turn on Google Storebot whitelisting, the extension also downloads Google’s published crawler IP ranges from Google, at most once a day; no customer data is sent with that request. Fraud prevention is recognized as a legitimate interest under GDPR and is explicitly permitted under the California Consumer Privacy Act (CCPA) as an activity that prevents security incidents and resists fraudulent or illegal activity. Merchants should include fraud screening in their store’s privacy policy, and merchants who keep MaxMind analysis on order records should account for that in their retention policy.


Frequently asked questions

Question 1 - Can I review orders myself instead of having them blocked?

Yes — new in 8.3.3. Raise the decline threshold so only flagrant fraud and card testing bots are blocked, and every other order goes through with its MaxMind risk score in the Risk Score column of your Orders list and the full MaxMind response in the order notes. Review the high scores, then cancel and refund before you ship. Keep the decline threshold below 100% so IP velocity protection can still stop card testing bots, and choose Insights or Factors so there's detail to review.

Question 2 - What about card testing bots that slow down and rotate IP addresses?

Rapid-fire bots are caught within minutes. The slow-rollers pause a random 1 to 30 minutes between tests and move across hundreds of IP addresses. With the velocity window and block set in hours — up to 24 and 72 — any IP the bot returns to is already blocked, at no query cost. Set Max attempts to 0 and each IP is blocked on its first decline.

Question 3 - Does this work with my payment gateway?

Yes. The extension screens orders before payment processing, so it works with all payment gateways — Stripe, PayPal, Authorize.net, and any other gateway that uses WooCommerce's standard checkout flow.

Question 4 - Will legitimate customers be affected?

Screening happens in tenths of a second and is invisible to customers whose orders fall below your risk threshold. Only high-risk orders see a decline message, which you can customize — many merchants use it to invite the customer to call and place the order by phone, so even a mistaken decline need not cost the sale.

Question 5 - What happens if MaxMind is unreachable?

You control this. The extension lets you choose whether to accept or decline orders when MaxMind returns an error or is unreachable. An optional email notification alerts you when screening is skipped so you can review the order manually.

Question 6 - Will this block Google Merchant Center's test orders?

Not if you turn on Google Storebot whitelisting. Verified Storebot checkouts skip screening and velocity protection entirely, and you can get an email the first time Storebot shows up each day plus a summary the next day.

Question 7 - What about phone orders and subscription renewals?

Orders with no shopper present — orders entered in the admin, scheduled renewals and orders from integrations — carry a staff or server IP address rather than the customer's. You choose how they're handled: whitelist them (recommended), screen them without IP or device data, or screen them normally.

Customer reviews

Average rating 4.8

5 reviews from verified users

5 stars, 80% of reviews
4 stars, 20% of reviews
3 stars, 0% of reviews
2 stars, 0% of reviews
1 star, 0% of reviews

Click to rate

  • Rated 4 out of 5
    edecals2United States (US)Oct 26, 2026
    I used MaxMind on another WooCommerce site but that extension only flags orders after the payment - which is no help when you're being carded — the attacker still finds out whether the card works. We were under a persistent attack for several weeks and every time I blocked the guy, he found a way around it. So I went looking specifically for an extension that would screen before authorization. I searched for MaxMind and WooCommerce, and found WolfPaw's Real-Time Fraud Detection and Blocking. It stopped the attack. Orders are screened before the payment gateway is contacted, so a declined attempt never reaches our processor and there's nothing for the attacker to learn from. The IP velocity blocking took care of the repeat attempts on its own and nuked the attacker's sessions. The extension also does a great job blocking 'normal' fraudulent orders. You set the MaxMind risk score threshold and any order that has a higher risk of fraud is automatically declined with the customer getting a screen message with the office phone number asking him to call to place his order. The fraudsters never do.
  • Rated 5 out of 5
    lisasmith140140United States (US)Sep 21, 2026
    Recently we started seeing a pattern of fraudulent orders using stolen credit cards. We were losing money on charge-backs and our payment processor was sending us threatening emails. Searching around the Woo extension catalog we found WolfPaw's Real-Time Fraud Detection module and decided to give it a try. It solved the problem immediately — high-risk orders are blocked before they ever reach our payment gateway, so there's nothing to charge back. The risk score emails give us detailed information on every order. We've gone from several charge-backs a month to zero. The module paid for itself in the first week.
  • Rated 5 out of 5
    stevelaicoUnited States (US)May 27, 2026
    We were getting hit with chargebacks every month from orders that looked legitimate until the card issuer reversed the charge weeks later. Since installing this extension, we haven't had a single chargeback from a new order. The difference is that this plugin screens orders before payment processing, so fraudulent orders never reach our payment gateway. We get color coded emails alerting us to declined orders and card testing bots. We use the MaxMind 'factors' service tier and the risk score emails are incredibly detailed. They explain exactly why an order was flagged. We have the order decline threshold set to 10% which catches most fraud. We'll probably lower it to 5% in a week or two. The velocity protection feature caught a card testing bot in our first week. The extension paid for itself in the first week. Highly recommended!
  • Rated 5 out of 5
    sales02cf3d975cUnited States (US)May 19, 2026
    My web-site was hacked, need to change everything. So once that was done, I felt my store and my customers need support. Installed Real-Time Fraud Detection and Blocking on our WooCommerce store and it's working great. Blocked a card testing bot right out of the box and a bunch of phony orders. Setup was easy - just installed the extension and entered our MaxMind ID and license key. We were screening orders right away. The email alerts give us a detailed risk breakdown on every order. Highly recommended.
  • Rated 5 out of 5
    dcnielf2a7178046United States (US)May 15, 2026
    Fraud issues have risen geometrically in the past few years and for those of us who depend on our web host to provide barriers, notice of attempted attacks as well as the "how to" in terms of safety for owners and client users, this has been a terrific tool. Notice of potentially fraud issues is sent via email within seconds of receiving an order. Color me pleased! I highly recommend the product.

Related Products

Price $279 annually
Rated 3.9 out of 5 stars
Price $79 annually
Rated 3.4 out of 5 stars
Price $59 annually
Rated 3.1 out of 5 stars
Price $109 annually
Rated 2.8 out of 5 stars
Price $109 annually
Rated 2 out of 5 stars
Price $49 annually
Rated 4.1 out of 5 stars
Price $109 annually
Rated 2.5 out of 5 stars
Price $199 annually
Rated 4 out of 5 stars
Price $39 annually
Rated 2.8 out of 5 stars
Use of your personal data
We and our partners process your personal data (such as browsing data, IP Addresses, cookie information, and other unique identifiers) based on your consent and/or our legitimate interest to optimize our website, marketing activities, and your user experience.