Today, we’re marking another step in the WooCommerce journey: the release of WooCommerce 2.4, the Helpful Hedgehog.
In our last release, we focused on the front-end of WooCommerce and so named the update “Handsome Hippo.” With this update, we’re focused on making store settings more intuitive for store owners by creating a brand-new onboarding wizard, simplifying setup for standard shipping options and improving how WooCommerce handles products with many variations.
Introducing the brand new onboarding wizard
↑ Back to topLet’s face it. eCommerce can be challenging, especially when starting out.
When you start a business, you need to learn some complicated things like taxes and shipping before you can sell anything. While some of that complexity is unavoidable, it shouldn’t be difficult to define these settings on your online store.
But, alas, it was. Older versions of WooCommerce greeted new users with a giant jumble of settings and offered no help or guidance on what to do next:
We’ve changed all that with the introduction of the onboarding wizard. Now, store owners are guided go through a step-by-step process to start selling as easily as possible:
With this new wizard, we’re using all the tools at our disposal to make the process straight-forward and pain-free. Automagically, WooCommerce will:
- Recommend mostly commonly used settings to make it easier to get started
- Set data like store location & currency based on geolocation
- Configure PayPal standard with just an email address
The whole process uses sensible defaults and just a handful of fields to get your store ready to accept orders in minutes.
Flat rate and international shipping options are much simpler
↑ Back to topSince WooCommerce launched, we’ve added many options for both flat rate shipping – meaning one fee for all shipping – and international shipping, largely to serve specific needs brought up by customers. Unfortunately, those features grews so much that the settings screens became hard to use.
We spent a lot of time thinking about how these methods are used and how to get you what you need without twenty hundred million settings to fill out.
I don’t want to show what flat rate shipping used to look like because we let it get far too bloated, but here’s the new and improved version:
If you want to multiply the rate by the number in the cart, you just need a bit of math:
Check out the docs for more examples of ninja math magic – we’ll keep updating these as we get more examples. Read the full technical changes (plus more screenshots).
Store owners can now prioritize shipping options
↑ Back to topAlong with simplifying the settings for our core shipping options, we’ve also tweaked the ways that shipping methods are prioritized.
Now, stores with lots of shipping methods can easily recommend a default option for customers to use. See our development release post for the full details.
Product variations now load 20 at a time — and without refreshing
When we created the ability for store owners to create variable products in version 1.0 of WooCommerce, we assumed people would sell a few t-shirts and have maybe 20 variations. We didn’t expect people to sell products with hundreds or even thousands of variations.
Needless to say, the system wasn’t designed for this and problems arose: the back end became long and hard to navigate, it could take forever to load and sometimes things wouldn’t save.
In WooCommerce 2.4, we’ve changed how product variations load in the back end to make it simpler for store owners:
- Variations will load 20 at a time to make it easier to navigate
- Loading happens via AJAX and Javascript, so you don’t have to wait for a page to refresh
For the more technical details, read on about how we improved the variations interface.
Geolocation now works with static caching
↑ Back to topWe introduced the geolocation feature in WooCommerce 2.3 – it identifies a customer’s location and then applies correct taxes and shipping. But we ran into some issues with static caching, which is used by plugins such as WP Super Cache and W3 Total Cache.
In 2.4, we’ve improved how WooCommerce handles geolocation to resolve this problem. For the developers out there, here are all the exciting technical details.
We also added some extra fun for developers
↑ Back to top- Custom AJAX Endpoints have been introduced to improve loading times on the frontend during events such as adding to cart. Previously, admin-ajax.php (the standard WordPress ajax endpoint) was used but this had the disadvantage of loading the entire WP admin just to make a request. The custom endpoints work around this.
- A Visual API Authentication Endpoint has been added. Services which integrate with the REST API can now use the visual authentication endpoint so a user can login and grant API permission from a single page before being redirected back.
More details for developers are on the dev blog.
Upgrade to 2.4 now!
↑ Back to topThat’s it for what’s new in WooCommerce 2.4. Upgrade now from your WordPress Dashboard, or download a fresh copy of 2.4 here. You can also read our upgrade guide to ensure a smooth transition from previous versions.
Remember: you should always make a backup before you update and update your WooCommerce extensions prior to updating WooCommerce itself.
For specific things to look out for with 2.4, potential compatibility issues and ongoing updates are on the dev blog.
What do you think of the Helpful Hedgehog? Let us know in the comments!
About
After upgrading to 2.4.0, all of my variable products are now listed as ‘Free’ :/
Have you fixed this? Im having aame problem
See my reply here http://woocommerce.com/2015/08/woocommerce-2-4-release/#comment-2065904
It’s to do with 1 missing piece of meta data; _stock_status at variation level. We’ll release an update soon.
great to know your on the job. ill stop pulling my hair out. look forward to the fix. any idea how long it will take?
Within the next hour.
Same here!
I just resolved it changing the style.css file.
It was:
.woocommerce .free-badge {
background: #222
I changed it to:
.woocommerce .free-badge {
display: none
it works for now 🙂
Updated and 117 products now listed free ??? Have closed stire for now. Anyone know a fix
Please see my reply here http://woocommerce.com/2015/08/woocommerce-2-4-release/#comment-2065904
Have upgraded and now variation select on front end is not working.
To be more specific. I’ve had to recreate all variations because I was getting an error that there were “No products available that match your selection”. After recreating variations, I no longer get the error, I just get a selectbox with no options.
For anyone with this problem, Claudio and I are working on an upgrade routine to update product data in/from WC 2.2 installs to solve the problem. This should be released shortly.
We just fixed this variation issue on WooCommerce 2.4.1: https://woocommerce.wordpress.com/2015/08/10/woocommerce-2-4-1-fix-release-available/
i updated to 2.4.1 but still getting the fault im afraid
sorry its working . i hadnt run the updater!! well done for getting this fixed fast. ;-}
The issue was corrected, if it persists is because you need click on the “Run the updater” button.
Hi there! I’ve updated to the latest, and run the updater but most of my variations are still showing FREE! as the price. (One of them has the right price, WTF?)
Thanks! (Its only my staging site so I’m not too worried!
You have not updated properly because it was fully corrected.
Still having an issue with products which shows as “Free!” after updating fix of 2.4.1. There is any other options to fix it?
I did the update and now my products are not aligned right, they’re overlapping, and pictures look different.
All you’re saying are things that are handled with CSS… Looks like you made changes to your theme or he is too outdated.
Because we did not do any changes to the CSS as you are reporting…
Please to report bugs with WooCommerce 2.4 in our Github: https://github.com/woothemes/woocommerce
If you can tell which version you updated from and also send the System Status report, we’ll thanks, because we can fix any bug quickly 🙂
Love this thank you!
Hello, I updated to 2.4.1. but I am still having the same issue: the product tabs (with description, reviews, etc) show up but they don’t change when I click them. Any ideas how to solve this problem? Thank you very much.
So far all reports of this have been theme related. One of the themes with the problem is DIVI and needs to be looked at by the theme author.
Thanks Mike, it was in fact theme related ( I use Divi ). The solution is:
go to themes/Divi/js folder
open custom.js file
look up for:
$( ‘a[href*=#]:not([href=#])’ ).click( function() {
if ( $(this).closest( ‘.woocommerce-tabs’ ).length && $(this).closest( ‘.tabs’ ).length ) {
return false;
}
Change it to return true
The tabs will now work again.
Hi examultimidia,
thank you so much for the snippet.
Saved me a lot of time and my day 🙂
I am using Divi-Theme as well in one of my clients websites.
You are a hero haha..seriously thank you.
A ridiculously annoying issue solved with something as simple as changing false to true but I’m sure it wasn’t simple to figure out.
Again, thank you!
This update keeps crashing my site. My host had to get me back up. They said that it is not updating properly, and it’s leaving the .maintenance file.
Try disabling the other plugins before upgrading, you may have a plugin that is causing it.
I have made the update to 4.2.1 and now at 4.2.2 but still cant actualize the version i get every time when i click on that bottom this error :
Fatal error: Out of memory (allocated 253231104) (tried to allocate 82 bytes) in /home/smartpro/public_html/_smart/wp-includes/wp-db.php on line 2223
Someone can help me with some info about how i can solve this? thanks.
This is lack of free memory on your server… May be your server with low memory or plugins consuming a lot of memory. This isn’t a problem with this version/update.
The memory was set as 259M first of update after that error i was setup to 526M but still the same problem.
There may be several things influencing this. Increasing the memory in this way does not mean that the machine will be able to allocate that amount.
Please open a support ticket here on support.woothemes.com so we can investigate the problem thoroughly.
Just ran the updater. All my variations are now showing “This product is currently out of stock and unavailable.”
Your theme need be updated.
This is not an issue with the WooCommerce but with your Theme unable to show the variations.
Hey Claudio,
Our theme developer has updated our theme to be compatible, however we still have the same problem:
Product Variations are IN STOCK on the back-end, on the front-end this no Product Variations load and this error message persists:
“This product is currently out of stock and unavailable.”
This came with the update. We’re trying to roll our hosting account and database back to before the update, hopefully this will fix the problem.
Have to find another solution, you guys breaking this stuff on ecommerce sellers 🙁
I have the same problem. Breaking changes.
I was debuged and found that data-product_variations in form are not loaded. If you have about 50 variations, then data-product_variations is empty 🙁
We have the same problem and aren’t so lucky with rolling back our database… 🙁 All was fine before this update.
SyntaxError: Unexpected token < Paypal now not responding , Im getting this error and cant find anything wrong anywhere. Is this from the update?
on firefox this is the error msg
SyntaxError: JSON.parse: unexpected character at line 1 column 1 of the JSON data
on chrome SyntaxError: Unexpected token <
Something (could be any gateway or plugin) is throwing a notice. If you check your server error log it will specifically mention the problem. Your host may be able to help you if you cannot locate this log.
had my host check and no error logs. also had a premium wordfence scan but found nothing. are you sure theres nothing in the new woo settings?
posted more about it here https://wordpress.org/support/topic/24-common-issue-syntaxerror-unexpected-token?replies=1
I unplugged all my plugins except woocommerce and it didn’t make a difference. Came with the update. When can we expect a resolve to the issue that obviously a lot of us are experiencing. It’s a pretty serious issue when customers can’t check out!
The same for me, guys! I think starting from 2.4.5, I got “SyntaxError: Unexpected number” error showing when a customer click on “Place order”.
This happens using BACS. Paypal access goes ok, didn’t try a transation, but if I cancel it, coming back to ecommerce gives me a list of db errors… So disappointed. I do not know what to do, my ecommerce is stuck.
Anyway, orders email confirmations are ok.
Have you still this problem ???
I’m getting this error as well. No errors in the log. Created support ticket.
I’m getting this too, did you manage to fix yours?
I had the same problem using “PayPal for WooCommerce” plugin.
Errors are:
Chrome: “SyntaxError: Unexpected token < "
Firefox: "SyntaxError: JSON.parse: unexpected character at line 1 column 1 of the JSON data"
IE: "SyntaxError: Invalid character"
The problem is on …./plugins/paypal-for-woocommerce/classes/wc-gateway-paypal-express-angelleye.php
you have there :
echo '‘ . json_encode($result) . ‘‘;
just remove the html comments like this:
echo json_encode($result);
I hope this will help.
P.S.
I do not understand why they have added those ‘comments’ there 🙂
Ovidiu,
Bingo! you got the answer. I don’t know why it worked for me since I’m using a different PayPal plugin but replacing that whole line with those 26 characters of code cleared up several other problems too. Good job sir!
Thank you,
Gregg
I’m having the same error after clicking process order
Chrome: “SyntaxError: Unexpected token < "
I'm using: gateway-beanstream, dose anyone have a fix for this?
There is another issue. After upgrading to 2.4.2, my customers cannot leave a reivew on the purchased product. Even after purchasing a product, the reviews tab say “Only logged in customers who have purchased this product may leave a review.”
I think this is related to https://github.com/woothemes/woocommerce/commit/0da69f2bef9f454945ebbaac581d1073655c8569 which was discovered this morning.
Yes but it doesn’t fix the issue 🙁
The issue is fixed for new orders. Thanks
hi mike would you know why the attributes no longer are shown in the order emails or even at the woo dashboard? The only way i see them is in the pdf view but it wasnt like this before.
thank you for your very good job. i developed a site with insurance contracts online sales. in characteristics i have 3 different such as duration, city and package. so in varations i must have 45 different. after update to 2.4.1 i went to varations and showed me only the 15 of package. i deleted all and added again from scratch another 45 varations. when i finished in frontend when i was going to make a compination it showed me that it didnt find such a compination. i updated to 2.4.2 today and still the same. i read that you can put only 10 varations each time i tried that nad worked for a while put only with 15 varations. i tried to put 5 more and now when i change one varation in the frontend it doesnt change the price. can you help me?
hi when i recieve new orders the variations no longer show on the new order receipt or the order on the dashboard. any idea why?
problem now fixed. thank you. the santax token error was being caused by woocommerce opening hours plugin by simba hosting. also fixed now after an upgrade.
Hello,
I recently ran the update and now SOME of our variable products are not working, while others are.
I cannot see a difference as to why some are and some aren’t, the items are in stock so its not that issue. I’m wanting to get this resolved asap as we are losing potential sales as customers cannot select our products. Could you please help? When I select an option, the dropbox shows nothing, despite three variable products being available.
Thanks
Running version 2.4.3
We’re having the same issue. All the variations appear on the new UI backend for Variations under the product information, however on the front-end we get this message:
“This product is currently out of stock and unavailable.”
The product is IN STOCK on the back end. 🙁
Running version 2.4.4
Hi,
Since 2.4.3 I have noticed in the Admin Dashboard that where you click on the name of the site at the top of the screen where it usually says “Visit Site” it also says “Visit Shop” both take me to a blank screen which has two menu items on it (Vist Site and Visit Shop) both which do nothing. We have had to disable Woocommerce. Can we load an older version? Any fix available? I can’t find any mention of this problem. We are using The7 theme.
Using 2.4.4 has the same issue.
I have this as well, however I am taken to my site, but all my products are out of alignment.
Cant find affix anywhere
Similar issues for me. Variations do not display properly. With 2 dynamic attribute dropdowns that are dependent upon each other, the 2nd dropdown shows all attribute options related to the product – not the ones that are dependent upon the 1st dropdown.
I reverted back to an older version of WC and all is fine again. Would like to update but, does not seem to be working.
We were very excited to update to WooCommerce 2.4.4 only to find that it broke all variations, now every product has a status of “This product is currently out of stock and unavailable.”
Our theme has been updated by the developer to be compatible, and we have disabled all other plugins.
We run a small business on WooCommerce and this update has caused us to lose tons of sales and we’re now scrambling to find another solution… 🙁
Just revert back to 2.3.13 version until WC decides to fix the stupid shit they changed. They think they made things better for the thousands of developers that tie into WC, but they made it a shit storm.
https://wordpress.org/plugins/woocommerce/developers/ (download and install 2.3.13)
I had to revert to WC version 2.3.x and it works just as it did before.
Cmon WC get your shit together. You know you have issues when you release 4 updates within a weeks time, now fix the Variation issue that EVERYONE is having.
Michael
That’s not work when i click on “add to cart” button.
We run small bussiness and this update made us lose some customer because of that problem.
Plz fix this soon!
Thanks.
Hi there,
I’m adding products with variations but the stock isn’t visible even when i’m saying that the variations are in stock?!?
Also there is now some kind of message displayed which is redirecting my clients to the woocommerce help docs? I don’t want that….
Can someone please help me out?
Hi Im having the same issue as some people where variations seem to be broken from the update.
Updated to 2.4.2 and they broke updated to 2.4.4 to try and fix and still seem broken, please let me know if there is a fix and also a fix that means I won’t have to recreate all the variations.
Kind Regards 🙂
Same issue This product is currently out of stock and unavailable. Now i cant sell … gosh
Same issue. No variations. Only difference I have is that it is not consistent with all products. Some have the variations and some do not. I have tried multiple tests and cannot identify what is causing the issue.
Ditto the variations problem. No prices, no add-to-cart, no image changes w/ variation selection. Inconsistent behavior from one product to the next.
Console error: add-to-cart-variation.min.js?ver=2.4.4:4 Uncaught ReferenceError: wc_cart_fragments_params is not defined
Another things I have noticed: some attributes now have type “Select (Public)” and some have type “Select”. But the types available in the UI are still just “Select” and “Text”. What is “Select (Public)”?
UPDATE: problem occurs as soon as an item exceeds 20 variations…..
i confirm 20 variable is ok . after that it bugs .
Hi Eric,
I switched my theme (flatsome) to storefront and it works with more than 20 variations. Back to flatsome, I have the same messsage about the unavaible product.
So it seems to be a theme bug and not a woocommerce one.
UPDATE UPDATE:
To fix add this to the theme functions.php
function custom_wc_ajax_variation_threshold( $qty, $product ) {
return 1000;
}
add_filter( ‘woocommerce_ajax_variation_threshold’, ‘custom_wc_ajax_variation_threshold’, 10, 2 );
Not working for me 🙁
Going to give this a go now, just created a new site and came across his variation issue, thought I was doing something wrong, but evidently it’s Woo that’s messed up, even with today’s update as well.
Do you have a roadmap or planned features list for WooCommerce? I’m currently managing 3 eCommerce sites and I’d like to know what’s in store (sic) for me.
Ever since 2.4.4 update, it is not letting me add price or stock quantity to my variable products
PLEASE FIX ASAP AS YOU ARE CAUSING US TO LOSE SALES!!!!
This is the worst update ever!!!! Is this because new WooThemes Owner? Why r you doing this???
Ok why did you remove expand all in attributes?
Why did you change the sorting UI?? Before i could click anywhere and just drag it now i have to drag it by this lines on the right.
Variation suck now! why they don’t show up sometimes when i duplicate product, but show as 3 variation, but i don’t actually see them until i hit save or update
Many more small details that just work like it now used to be…
You actually didn’t improve this update but made worse! Please fix everything to what we are used to!
Hope you care.
I have to butt in here with a comment on the tabs functionality issue — I am not handling *any* WooCommerce theming (including templates, styles, and scripts) currently, but it turns out that the update could conflict with any smooth scrolling function you have set up in your theme.
Simply turning “return false” into “return true” may cause display issues (for me, it would flash the target screen position before executing a scroll) and also caused the display of the anchor in the URL, which false prevented.
Ideally WC should revert to the old tab display, rewrite the new method, or at the very least make a BIG FAT NOTE about interference with standard, widely used functions. In the meantime, for those able, you should modify your smooth scroll function and anchors to run on or within a certain class (e.g. .container a[rules] OR a.smooth[rules] ) OR (more advanced) add an exception for WC tabs.
[Sorry for the repeat posting, I didn’t realize that HTML rendered and replied instead with escapes but missed a tag the first time (and apparently the “reply” button — mods, you can remove the mistake and this text as well if able, otherwise — “Hi everyone…” *waves awkwardly*]
I should perhaps specify what I’m talking about so people know what to look for:
$(‘a[href*=#]:not([href=#])’).click(function() {
if (location.pathname.replace(/^\//,”) == this.pathname.replace(/^\//,”) && location.hostname == this.hostname) {
var target = $(this.hash);
target = target.length ? target : $(‘[name=’ + this.hash.slice(1) +’]’);
if (target.length) {
$(‘html,body’).animate({
scrollTop: target.offset().top,
}, 1000);
return false;
}
}
});
Changing “false” to “true” will fix the issue but may break the scroll function as I mentioned above. Modifying your pages/templates/other code to contain or class the relevant <a> tags and changing the first line accordingly is the easiest way to fix the issue. Examples below for clarity.
USAGE: CONTAINER
<div class=”submenu”><a href=”#section1″>S1</a><a href=”#section2″>S2</a></div>
Change script to:
$(‘.submenu a[href*=#]:not([href=#])’).click(function() { … }
USAGE: CLASS
<a href=”#top” class=”smooth-scroll”>Back to top</a>
Change script to:
$(‘a.smooth-scroll[href*=#]:not([href=#])’).click(function() { … }
Hi I’m running Wootique theme. Is this release compatible? I am trying to look on the Wootique page and don’t see any info on that. thanks!
Is Helpful Hedgehog like the microsoft paperclip “clippy”?! I always liked that guy, he got some bad press but i thought he was pretty cool. Better than Siri. It always insists on phoning the most awkward person in your phonebook. You: “Siri Phone John…” – Siri: “No problem, Face timing your ex girlfriend’s mum now…”
This has been one of the worst product upgrades I have ever been involved with. I can’t believe how much it has broken my site and it is obvious the plan is to have your millions of users be your beta testers at our massive cost of sales and reputation. Given how many plugins are out there based on this platform there needs to be a better way to manage the process. And now when you need support at its most it takes days for responses and then days between responses. You need a paid support program to fund the critical need for timely support. we will pay for it. So far woo has only convinced me to find another solution. To do this update on top of a big Word Press release is also adding fuel to the fire.
Indeed it is horrendous! I should have never upgraded! Crucial plugins like table rate shipping don’t seem to work anymore since they crash the site now…
DEVELOPERS – PLEASE HELP WITH THIS CRUCIAL BUG.
When creating variations, THE 21st VARIATION you add seems to break the entire thing which results in the message “Sorry, no products matched your selection. Please choose a different combination.”
This is killing sales, literally. Do you have documentation on downgrading until this is all sorted please???? It’s been over a week since support has responded, this is crazy.
Thanks! Awesome!
Customers unable to purchase, reporting the following error SyntaxError: JSON Parse error
Also, I had to change all my variable items into single products because my products were showing out of stock
This update sucks – thanks for screwing my business up and losing me money!!
After updating WooCommerce and all WooCommerce plugins, the AWS Plugin is not working correctly. I know that the AWS keys and secret code are correct. I can still request the files outside of WooCommerce and they work fine. If I change the file name in the product setting to the direct link, it works. When download files are requested through the AWS S3 plugin, a SignatureDoesNotMatch error occurs.
Hey Crystal, can you open a ticket with support about this if you haven’t already? Thanks!
I did. I haven’t heard back yet.
You are in good hands then. 🙂
Just in case there’s been a miscommunication, mind dropping your ticket number here? Thanks!
Woothemes…. Is there any update on the status of the variation issues? What are the known issues that cause this problem? Is it the themes? Plugins? Any info you can provide?
Hi Tim, these issues should be addressed as of the update to 2.4.6. If you’re still having problems with variations with WooCommerce fully updated, please open a ticket with support and we’ll look into it. Thanks!
We installed 2.4.6 and we still have variable products showing up on our site as “Out of Stock”. We have a product with 48 variations. We’ve had Manage Stock turned on for each variable, we’ve had Manage Stock turned off for each variable. Either way, we are still getting the same problem. We’re also experiencing this with products that have less than 20 variations.
This is bad.
Hi Jared, your best bet would be to contact support (if you haven’t already) for some insight. I’m unfortunately not the best person to help you here. However I do know that some third party themes have been conflicting with the variations since the update, so you could try switching back and forth quickly to see if that is the cause. Best of luck!
Hi guys, I’m having a BIG ISSUE with Authorize.net AIM
I’m getting this error at checkout after I made a payment;
” SyntaxError: JSON.parse: unexpected non-whitespace character after JSON data at line 1 column 4 of the JSON data ”
162{“result”:”success”,”redirect”:”https:\/\/www.qqq.com\/checkout-2\/order-received\/18323?key=wc_order_55dd16e23cce6″}
This is being looked into via support.woothemes.com, if thats you 🙂
VERY BAD SUPPORT!!! and you are not giving a SOLUTION!!! URGENT !!!
SyntaxError: Unexpected token < WOOCOMMERCE shop
support.woothemes.com
Hi..
I get an error;
chrome; SyntaxError: Unexpected token <
Edge; SyntaxError: Invalid character
Any ideas?
There is a sticky on .org support for this issue
https://wordpress.org/support/topic/24-common-issue-syntaxerror-unexpected-token
I made this change in wp-config and still get the same error.
I tried that wp-config change, too. Same error.
Hi,
I’m using WooCommerce 2.3.
I tried to upgrade to 2.4 through the WP plugin manager but, after the update, all the “manage stock” checkboxes of my variations was unchecked. Moreover, when I rechecked the “manage stock” checkbox of any variation, the quantity available value was empty.
I read about it in the comments of this post, and I saw that I had to do the update with the “Run the updater” button (I don’t understand this: why does WP have the plugin manager, then?)
Anyway, after trying it, the result was the same. Plus, the the process upgraded WooCommerce to 2.3.13 version, not 2.4.6. And, although WooCommerce isn’t updated to the latest version, I can’t find the “Run the updater” button anywhere else.
How should I proceed? Am I missing something?
Thanks in advance.
After upgrading website to WordPress 4.6, the most recent version on Canvas Theme Version: 5.9.10, and Woocommerce to 2.4.6 all of my products that are Variable Products show this error.
Fatal error: Call to undefined method WooCommerce::attribute_label() in
wp-content/plugins/woocommerce/templates/single-product/add-to-cart/variable.php on line 24
Please advise. Single products are working fine, it’s just variable ones that show this error, along with other missing data including additional products, and Add To Cart Button.
Help is greatly appreciated.
Thanks,
Cyprian
When setting a variation in a new product, after creating the variation and saving. the data isn’t saved and it’s going back to it’s original step with no data saved.
Is there Any solution for that?
Woocommerce Version is 2.4.6
Wordpress Version 4.3
Thanks,
Pinto
Hi all,
for help fixing the out of stock problem, look for this solution:
https://github.com/woothemes/woocommerce/issues/8980#issuecomment-136004579
Have a nice day,
Jan
Is anyone still having a problem with variations with mulitiple variations displaying “Please choose product options…” when trying to add to cart?
But if you click add to cart a second time then it goes through fine.
Running woo 2.4.6 – I have tried twenty fifteen with no other plugins and still have same issue
Just to add to my note above – If you wait for the prices to change (when clicking variations) you don’t get the “Please choose product options…” as often.
I rolled back to Woo 2.3.13 and all issues were resolved apart from my theme (virtue premium) no longer supports Woo 2.3.13, but twenty Fifteen works fine (twenty fifteen did not work with woo 2.4.6) – its very frustrating as all the design work has gone into the Virtue theme and can not replicate it in twenty fifteen.
Just in the last few days now my shipping now isn’t working. I had shipping classes set up for different product categories and now it just shows “Shipping – Flat Rate (Free)”. I entered in a cost in the flat rate settings and it changes but still can’t figure out how to get it to work for the classes.
Please help!!
Woocommerce needs to address this JSON unexpected Token error that has been plaguing sites now for weeks! We continue to get customers who submit duplicate purchases because of this error!
What is going on!! This costs small businesses like us in customers, sales and lost time!
Totally agree it’s a global problem that’s Stopping customers from buying through paypal!
Only way around it for me was to download and install woocommerce 2.3.13 – (Make a backup of existing install)
I agree… I’m getting the same errors but I am using Authorize.net and Authorize.net AIM. Support keeps pointing me toward these gateways as the problem… so I shut them off and placed a free order… the problem persists.
What do you suggest to do about this Tab error for those of us not running Divi or Customizr? I am reading this is theme specific. But what has CHANGED on Woocommerce’s end to render the tabs incompatible after the update to 2.4?
Divi wants me to change some code that doesn’t exist. Customizr wants me to disable “smooth scroll”, which I cannot find. So what is the error actually related to?
after updating to 2.4.6 the flat rate shipping for variations is now broken. The shipping for all of my products is now showing up as flat rate (free). Please help!! I am using paypal as my payment gateway…
WooCommerce is a really great idea who want to start there own eCommerce business or site, but it did not help us. Now we hired a company who do this for me. and our site is.
http://www.translationindia.com